Used in a wide range of industries: cement, plaster, lime production, metal mills, joinery, stationery, grain mill, power plants, CHP plants and factories producing various types of ceramics.
is the separation of molecules from suspensions, air purification or technical gases from various types of dust.
They must be very resistant to mechanical stretching, abrasion and have a high thermal resistance.For production usesynthetic fibres especially polyesterwhich is subjected to heat treatment in water and then in the air to obtain non-woven fabrics on both sides. Porosity is the largest in the wall areas. When cut along we get a fleece that fulfills the function of a highly effective filtration material in which the side of the mossy stops the largest particles. And the smallest ones are retained in the depths of the material as the thickening increases.
It has a very high ability to retain varnish molecules with minimal air resistance.
They form elemental glass fibers whose density increases proportionally with the density of laminaranom forming the side of the air outlet.
It is cut to size (length, width) of a piece of material, it acts as a filter.
It is characterized by the absence of the surrounding frame and low operating costs and the rest of the advantages used for its implementation of the filter fleece. We distinguish the formats from filter fabrics, glass, filter foam CALLED sponge or PPI because of the decisive factor in the choice of concentrating per inch.
They perfectly separate solids from liquids or gases by mechanical stopping them.
They act like a sieve capturing organic and inorganic contaminants. Another name is foam, because its open cell structure resembles it. It is obtained by the thermal reduction process. The effectiveness of their filtration is determined by the thickening of the stitches per inch the higher the better the filtration rate. We distinguish between 10, 20, 30, 45 mesh thickening per inch. They are used in the filtration of air and water , among others: filters for machines, compressors, compressors, filter elements in automotive, swimming pools, aquariums, pond, ponds.
They are used wherever substances are spreled in a liquid state. Paint industry, food, metallurgical, automotive, furniture, paint booths, spraying walls.
Andreae works on the principle of inertial separation. Particles heavier than air are adhered to the walls and the flow continues without obstruction. The paint particles adhere to the filter walls when traversing with air through the created maze of walls and openings.
They boast, above all, high performance, low installation and disassembly costs, very low risk of self-ignition, high absorbence of 98.1%, Ecological Execution.
Increases its effectiveness with saturation only when full filling it needs to be replaced. They are made of two layers of reinforced cardboard that resemble the design of a labyrinth with a pre-formation in the alternating arrangement.
Used as the first or second degree of filtration in air-conditioning and ventilation systems. Progressively superstructed fibers with increasing density, laminated side of the air outlet and impregnated with a special means to increase absorption capacity. Dust Stop 4 "is a 100% glass fiber with a high retention capacity and storage of impurities with low...
100% polyester fibrils are progressively superstructured from the side of the blue air intake, thermally bonded. ECO BLUE characterized by high filtration efficiency throughout the life cycle. Mechanically strong even at high flow rates. It is used in preliminary filtration in buildings and all branches of industry.
Used in air filtration, filtration of water in swimming pools and aquariums. It has 97% open pores. It is highly resistant to moisture and has an extremely high fluid collection capacity. You can wash it. The PPI 10 mat has a pore density of 10 per inch. It consists of 100% polyurethane. The filter foam is resistant to moisture and thermal effects. The...
It is characterized by extremely high fluid collection capacity and resistance to moisture. It is also thermally resistant. Used in aquaristics, swimming pools and air filtration. The PEI 20 filter mat has 97% open pores at a density of 20 per inch. You can wash it. Thanks to its long service life, it allows low operating costs. 100% polyurethane.
The filter foam PPI 30 has 97% open pores at a density of 30 per inch. The advantages include very high fluid collection capacity and resistance to moisture. At the same time it is also thermally resistant. Used in aquariums, swimming pools and air filtration. Suitable for washing. Thanks to its long life it saves on operating costs. 100% polyurethane.
Thanks to its long life it saves on operating costs. The 100% polyurethane foam filter mat PPI 45 has 97% open pores at a density of 45 per inch. It guarantees a very large ability to collect fluids and resistance to moisture. In addition, it is also thermally resistant. Used in swimming pools, aquaristics and air filtration. Washing options.
It is a pre-filter used in combination with glass nonwovens that are inside paint walls. The Anderae white, brown filter consists of glued two layers of waterproof paper. They use the so-called Vnturi effect through a special shape of the walls and the arrangement of openings on which the pollutants flowing with the air settle.
The LF 40 non-woven fabric is 100% thermally bonded polyester fiber. It is characterized by high dust absorption and very high mechanical strength and long life over the entire period of use. It is resistant to chemicals and is used in the production of pre-filters of all branches of industry and many buildings and houses very widely used.
100% polyester fiber material is progressively superstructured, thermally bonded by needle method. MSB 130 is a high mechanical strength and high stiffness of the material, dimensional stability throughout the life, even at high air flow values. Resistance to chemicals. Used for pre-filtration.
Material NF 300 is a very durable nonwoven fabric. It is characterized by high dust absorption, low pressure drop, long service life and low operating costs. It is resistant to chemicals and flame retardant. NF 300 is 100% polyester bonded fibers thermally thickened from the air outlet side. This is an exact filter. Used in paint shops as a ceiling filter.
The NF 400P material is 100% progressive reinforced polyester fiber, thermally bonded and saturated with a special adhesive (activated carbon) that significantly increases dust absorption. Used in spray paint booths and as a filter to protect electronics in telecommunications cabinets. It guarantees dimensional stability even at high flow rates.
Used as a ceiling filter in spray painting booths and as a filter to protect electronics in cabinets. NF 500P is 100% polyester fiber saturated with a special adhesive and additionally protected with a polyester mesh from the air outlet side. It ensures an even air flow and stops dirt in the nonwoven even when the blower is started and stopped.
Non-woven NF 600PS used in spray painting booths has excellent filtration parameters confirmed by European, American approvals. It ensures an even air flow and retention of impurities even in case of sudden shocks. Thermally bonded polyester fibers, saturated with a special adhesive, secured with a polyester mesh at the air outlet.
The NGB / 4 material works effectively throughout its entire life. It is distinguished by low pressure drop and high dust absorption, additionally resistant to moisture and flame-retardant. NGB / 4 is a thermally bonded fleece with 100% polyester fibers that are blue from the air inlet side. It is used in buildings and all branches of industry.
Used in painting booths and suction installations, paint shop for removing mists coming from sprayed paints and varnishes. Paint Stop 2 "is a progressively built glass fiber with increasing density and a laminated side of the outlet with a high separation capacity of lacquer particles and paints from the air.It is characterized by high efficiency and low...
Nonwoven with a very high retention capacity of paint and paint particles with a minimum of air resistance. Progressively superstructed glass fibers with increasing density and laminated side of the air outlet. Paint Stop 4 "is performance, long life and low cost of operation designed to remove mists coming from sprayed varnishes, paints. Used in lacquers...
Thermally bonded polyester fibrous and reinforcing mesh on the inlet side. The material is characterized by high efficiency throughout the operation period, an additional advantage is dimensional stability even at high air flow values. RBW 200 is mainly used as a pre-filter for automatic scroll, tape and roller filters.
A filtering piece cut to size. Exercising our knowledge without a surrounding frame. Due to the wide range of applications, for devices and services. It has and the properties of the filtering nonwoven z has been made. For charitable installations.
Thermally bonded 100% high-performance polyester fiber throughout its entire life. Non-woven T 150 is characterized by mechanical strength. It provides dimensional stability even at high flow rates. Resistant to chemicals, flame retardant and cheap to use. Used in public buildings and all industries. Used for pre-filtration.
It is used for air purification in pre and fine filtration.
Non-woven glass, formats, filter mats, PPI and Andreaecardboard-Labyrinth filters, which are used in machines, control cabinets, compressors, air-conditioning and ventilation units, cabs Coatings, industrial buildings, kitchen hoods, c...
It is used for air purification in pre and fine filtration.
Non-woven glass, formats, filter mats, PPI and Andreaecardboard-Labyrinth filters, which are used in machines, control cabinets, compressors, air-conditioning and ventilation units, cabs Coatings, industrial buildings, kitchen hoods, catering establishments, food production, machinery, hospitals, garages as pre - scrolled, roller, belt,and other filters Different types of workstations. Their wide application owes high pollen absorbency and throughput. It is economical to say the cheapest and basic solution to allow the filtration of polluted air. We offer non- woven Fabrics in bales of whole and cut to meters. Also in custom cut dimensions in the form of a format.